For the people who add or remove bracelet frequently or not trust the AD because they might scratch the watch by not using the proper tools....
I am not affiliated with the seller in anyway , just here to help out so you could get an idea what parts you need.....
https://www.esslinger.com/bergeon-67...er-tool-block/
1. Bergeon 6744-P-S Watch Band Soft Bracelet Holder Tool Block....^^^.... $13.95
https://www.esslinger.com/brass-and-...bergeon-30417/
2. Brass and Nylon Face Hammer from Bergeon 30417...^^^... $15.95
https://www.esslinger.com/replacemen...able-per-each/
3. Pin for Bergeon 6819 Band Pin .85mm...^^^... $16.88
https://www.esslinger.com/watch-band...k-pin-remover/
4. Watch Band Screw Pin Remover Tool....^^^... $14.95
https://www.esslinger.com/four-eye-l...th-headspring/
5. Four Eye Loupe Magnifiers Set With Headspring...^^^... $15.95
Grand total price for the parts is $77.68
Now for the steps of DIY disassemble bracelet link for Aquanaut & Nautilus ....
Step 1: Using the masking tape to tape the watch head and any parts you may scratch the watch...
Step 2: If your band and watch pin is flushes you will need to use the Watch Band Screw Pin Remover Tool to push the pin about 1mm so the Bergeon 6819 Band Pin will drop in place....
If the Bergeon 6819 Band Pin will drop in place, then you could skip step 2:
WARNING: Use the Four Eye Loupe Magnifiers Set With Headspring while do this so you don't miss and scratch your bracelet... And also do not use the Watch Band Screw Pin Remover Tool to push the pin all the way otherwise you won't be able to use the Bergeon 6819 Band Pin and end up damaging the pin and tube....
Step 3: Place your watch on the Bergeon 6744-P-S Watch Band Soft Bracelet Holder Tool Block and use Bergeon 6819 Band Pin .85mm to hammer the pin out until the pin is drop with the Bergeon 30417 Brass and Nylon Face Hammer....
Congratulations.... You just disassemble link.....
Now for the steps of DIY reassemble bracelet link for Aquanaut & Nautilus ....
Step 1: Place your watch on the Bergeon 6744-P-S Watch Band Soft Bracelet Holder Tool Block and use Bergeon 30417 Brass and Nylon Face Hammer to hammer the pin back until it flushes or close to flushes....
WARNING: DON"T USE THE BRASS SIDE..... Use the nylon face of the hammer....
Step 2. Use the Watch Band Screw Pin Remover Tool to push the pin if you want the pin to align evenly.... If it flushes or align evenly during step 1 you could skip step 2.....
WARNING: Use the Four Eye Loupe Magnifiers Set With Headspring while do this so you don't miss and scratch your bracelet.
Step 3: unmask the tape....
Step 4: Pat yourself on the back and you done......
Congratulations you now know how add or remove bracelet link for Aquanaut & Nautilus ...
Hopefully this information help....
