How accurate is your Rolex

[Cwall12345]

My first and only Rolex is a 2023 Sub Date. There are lots of things I love about it. But it is not nearly as accurate as my Tudor watches.

This watch is losing about 6 seconds per day on the wrist. When I set it down at night, it usually gains back a couple seconds.

I had sent it to Rolex for a service as it had started losing and gaining time erratically, about 8 seconds per day. I just got it back and it is better but it is not +- 2 secs/day.

Any suggestions or is this par for the course?

[0nly5iv3Digits]

All of mine are regulated to +/- 1s/24 hours.

Yours didn't need a service if its a 23', but rather a regulation. +/-2s is superlative chronometer status, as Rolexes are advertised. It is good.

[Easy E]

Originally Posted by 0nly5iv3Digits

Yours didn't need a service if it’s a 23', but rather a regulation.

This may not be a completely accurate statement

[Andad]

Originally Posted by 0nly5iv3Digits

All of mine are regulated to +/- 1s/24 hours.

Yours didn't need a service if its a 23', but rather a regulation. +/-2s is superlative chronometer status, as Rolexes are advertised. It is good.

Wow!!

Seriously?

[0nly5iv3Digits]

Originally Posted by Andad

Wow!!

Seriously?

What’s serious is my OCD… so yes… I have them regulated to +/- 1s per day. But I can often get 0s variation when I lay the watches down at night.

[Andad]

Originally Posted by 0nly5iv3Digits

What’s serious is my OCD… so yes… I have them regulated to +/- 1s per day. But I can often get 0s variation when I lay the watches down at night.

When you say all.
How many do you have that are not only ‘regulated’ to +/-1 but can maintain that when worn?

[padi56]

Originally Posted by 0nly5iv3Digits

All of mine are regulated to +/- 1s/24 hours.

Yours didn't need a service if its a 23', but rather a regulation. +/-2s is superlative chronometer status, as Rolexes are advertised. It is good.

The words Superlative Chronometer have been on Rolex watch dials for the past 40 odd years .And to bare the word chronometer on the dial it must be certified by the Swiss COSC test which is a AVERAGE of -4+6 seconds a day. The main reason for this new spec is that Omega started first so Rolex had to follow. Now the movements are tested by Rolex after the COSC test with the movement in its case which is a good thing. And this new precision test to -2+2 seconds is much like the COSC test at time of testing. This don't mean it will perform exactly the same every day for life, as on the wrist wearing there are many variables to overcome like wearers wearing habits etc.

[Old Expat Beast]

Originally Posted by padi56

The words Superlative Chronometer have been on Rolex watch dials for the past 40 odd years . . .

More like 65 years by now. It was around 1959/1960 that Officially Certified Chronometer was changed to Superlative Chronometer Officially Certified.

[t65tampa]

All of my Rolex watches are within +2 to -2 sec a day. My AP watches range from +4 to -4 sec a day. My Panerai is at +2 sec a day. My PP 5124 is at +2 sec a day.

I'd wear your Submariner and see where it settles out. You've got plenty of warranty and you can always send it back to a Rolex Service Center if needed. Give it some time on the wrist with regular wear. I know breaking in a mechanical watch doesn't really make sense, but I have had a few watches over the years seem like they take a while to stabilize in consistent timekeeping after I bought them.

[csaltphoto]

Originally Posted by t65tampa

All of my Rolex watches are within +2 to -2 sec a day. My AP watches range from +4 to -4 sec a day. My Panerai is at +2 sec a day. My PP 5124 is at +2 sec a day.

I'd wear your Submariner and see where it settles out. You've got plenty of warranty and you can always send it back to a Rolex Service Center if needed. Give it some time on the wrist with regular wear. I know breaking in a mechanical watch doesn't really make sense, but I have had a few watches over the years seem like they take a while to stabilize in consistent timekeeping after I bought them.

It makes no sense at all but was true in my case. Right after service (5 years ago) mine was about +4. But it's settled in to +2/spd. On average.

[kilyung]

I used to obsess about this when I started collecting. So much so that I took watchmaking classes and bought thousands of dollars in tools. I’m glad I did all that but as I’ve learned more and collected more watches (and thus wear each watch less frequently), I’ve gotten over accuracy. If it’s accurate to within a minute a day, I’m good. If I want uncompromising accuracy there’s Oysterquartz or even a digital watch.

[padi56]

Originally Posted by kilyung

I used to obsess about this when I started collecting. So much so that I took watchmaking classes and bought thousands of dollars in tools. I’m glad I did all that but as I’ve learned more and collected more watches (and thus wear each watch less frequently), I’ve gotten over accuracy. If it’s accurate to within a minute a day, I’m good. If I want uncompromising accuracy there’s Oysterquartz or even a digital watch.

Have to agree cannot under stand why many today worry and fret over a few seconds, thank god my life was never ran to the exact second. I have been wearing Rolex watches for well over 50 years, but must admit never been anal about checking to the exact second. I check mine once a week or longer if more than a minute out might adjust.

[travisb]

Originally Posted by kilyung

I used to obsess about this when I started collecting. So much so that I took watchmaking classes and bought thousands of dollars in tools. I’m glad I did all that but as I’ve learned more and collected more watches (and thus wear each watch less frequently), I’ve gotten over accuracy. If it’s accurate to within a minute a day, I’m good. If I want uncompromising accuracy there’s Oysterquartz or even a digital watch.

Pretty much the same here. I've never taken watchmaking classes but I stopped obsessing about accuracy years ago. If it's not noticeable without testing it I don't worry about it. I just enjoy my watches.

[brandrea]

Originally Posted by kilyung

I used to obsess about this when I started collecting. So much so that I took watchmaking classes and bought thousands of dollars in tools. I’m glad I did all that but as I’ve learned more and collected more watches (and thus wear each watch less frequently), I’ve gotten over accuracy. If it’s accurate to within a minute a day, I’m good. If I want uncompromising accuracy there’s Oysterquartz or even a digital watch.

Originally Posted by travisb

Pretty much the same here. I've never taken watchmaking classes but I stopped obsessing about accuracy years ago. If it's not noticeable without testing it I don't worry about it. I just enjoy my watches.

I’m with these guys (minus any classes :chuckle).

To each their own

[MrMercedes]

Originally Posted by brandrea

I’m with these guys (minus any classes :chuckle).

To each their own

same as me!

[KatGirl]

Originally Posted by Cwall12345

My first and only Rolex is a 2023 Sub Date. There are lots of things I love about it. But it is not nearly as accurate as my Tudor watches.

This watch is losing about 6 seconds per day on the wrist. When I set it down at night, it usually gains back a couple seconds.

I had sent it to Rolex for a service as it had started losing and gaining time erratically, about 8 seconds per day. I just got it back and it is better but it is not +- 2 secs/day.

Any suggestions or is this par for the course?

I wouldn’t stress over -4 seconds per day. That is within chronometer standards. If it starts losing more time, then start to worry, but not yet.

Kat


Sent from my iPad using Tapatalk

[MikeCa]

I check my Rolex against my smartphone every morning when I put it on, it ranges from 0 to +0.5s per day

[csaltphoto]

Sorry but this is the one thing I will hold Rolex's feet to the fire on. Lots of high end watch manufacturers don't even publicize accuracy standards. Or you have to dig around in the technical specs fine print. Rolex trumpets their "Superlative Chronometer" standard from the highest castle walls, prints it on every dial, mentions it in every marketing spiel. So darn right I'm going to expect it, or something very close to it. I know how many seconds there are in a day, I know car mileage is often tested under ideal conditions. Most people who buy a performance car don't care about mileage. They care about performance. Rolex is a performance mechanical watch.

[JMGoodnight369]

Originally Posted by Cwall12345

My first and only Rolex is a 2023 Sub Date. There are lots of things I love about it. But it is not nearly as accurate as my Tudor watches.

This watch is losing about 6 seconds per day on the wrist. When I set it down at night, it usually gains back a couple seconds.

I had sent it to Rolex for a service as it had started losing and gaining time erratically, about 8 seconds per day. I just got it back and it is better but it is not +- 2 secs/day.

Any suggestions or is this par for the course?

I would send it right back. That is outside of spec and IMO unacceptable for a time piece that cost over 10k and is advertised to run within a +/-2 per day. I’m sure Padi will comment soon enough about how it shouldn’t matter as Rolex today are nothing but jewelry and there’s 86000 seconds a day or whatever jargon others have to say. I had a 124060 that ran slow from day 1. Went to Rolex twice before it started running correctly. It’s a bummer and I feel for you and the frustrations

[KatGirl]

Originally Posted by JMGoodnight369

I would send it right back. That is outside of spec and IMO unacceptable for a time piece that cost over 10k and is advertised to run within a +/-2 per day. I’m sure Padi will comment soon enough about how it shouldn’t matter as Rolex today are nothing but jewelry and there’s 86000 seconds a day or whatever jargon others have to say. I had a 124060 that ran slow from day 1. Went to Rolex twice before it started running correctly. It’s a bummer and I feel for you and the frustrations

I just hate that he has to be without it for weeks again. I do agree completely, in principle , though. You are spot on.

Kat


Sent from my iPad using Tapatalk

[GrumpyMax]

After last service, my Explorer II is +15 sec / 2 months. And I agree with the point that as long as Rolex advertises its watches as superlative chronometer, it should be running according to the specs. As soon as mine will fall out of +/- 2 sec (averaging on the long time interval, not one day), I'll send it for regulation again.

[Kevin of Larchmont]

My 116660 DSSD lost one second in 28 days (posted about it in another thread). I realize that this is an anomaly but I’m pretty thrilled that it’s my anomaly.

[Mr Ben]

I’m not far off Kevin’s DSSD - have worn my Exp II daily for about 16 months (bought new). I normally check the time when I adjust the date in a short month and it’s always been within 5 seconds, sometimes spot on which is astonishing over the course of 60-90 days.

[Curated]

Couldn’t tell you how accurate mine are as I have never checked….they are accurate enough, that I do know. Life is too short to obsess over a watch being a couple of seconds off.

[Steerpike999]

Just checked my 116710LN purchased new May 2009 runs +2sec/day.
Its always been a very accurate watch. first few years it was always on my wrist 24/7. last few years probably gets 3-4 days wrist time every 4-6 weeks in the rotation.

Rolex make a good watch!

[Old Expat Beast]

Originally Posted by Cwall12345

My first and only Rolex is a 2023 Sub Date. There are lots of things I love about it. But it is not nearly as accurate as my Tudor watches.

This watch is losing about 6 seconds per day on the wrist. When I set it down at night, it usually gains back a couple seconds.

I had sent it to Rolex for a service as it had started losing and gaining time erratically, about 8 seconds per day. I just got it back and it is better but it is not +- 2 secs/day.

Any suggestions or is this par for the course?

If you have sent it in to Rolex already and it has come back losing 6 secs/day, you should send it back again. Maybe tell them you know about the 32xx movement issue discussed here: https://www.rolexforums.com/showthread.php?t=786299

[BMWMotoRider]

My 2 year old Seamaster 43 is currently between 20 and 30 seconds slow per day. I’m debating on when to send it, thinking that maybe someday soon there will really be a fix for the 3235 movements.

[Harry-57]

If it bugs you, send it in again. It is running out of Rolex spec and still in warranty.

[Number3]

Of the five Rolexes I’ve had only the Hulk ever came close to being ‘in spec’. My Omegas on the other hand are all spot on.

[Moondoggy]

I don't even set the time....true