ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

JJ Irani · 24 September 2005, 02:59 PM

Hi guys,

We all know that when we pick up a Rolex, chances of getting one with its crown straight up are like 1:100....seriously.

In 25 years and 16 Rollies, well I guess I could consider myself lucky...'cause I got two of them - both brand new - with crowns at 90 degrees to the horizontal!!

Firstly, my former SD...

and now my new Exp-II...

Someone on another forum (who was extremely anal about this) can eat his heart out!! LOL! Sorry, just couldn't resist!!

padi56 · 24 September 2005, 05:28 PM

Myself never botherd to look JJ,as long as its screws down its ok with me

worktolivelife · 24 September 2005, 07:17 PM

worktolivelife · 24 September 2005, 07:18 PM

mamas · 24 September 2005, 08:25 PM

lucky guy JJ .. when you visit mansors and see all that clevage.. is it only the crown that is straight up?

Seadweller · 24 September 2005, 08:56 PM

Quote:

Originally Posted by mamas

lucky guy JJ .. when you visit mansors and see all that clevage.. is it only the crown that is straight up?

LOL

baseballduck · 24 September 2005, 11:15 PM

Not that I would really care, but when and if I finally get a sub and the crown isn't straight up can't they adjust it or something?

Tyler

Sam · 24 September 2005, 11:29 PM

Must be an EXPII thing JJ. Here's mine!

worktolivelife · 24 September 2005, 11:30 PM

Quote:

Originally Posted by baseballduck

Not that I would really care, but when and if I finally get a sub and the crown isn't straight up can't they adjust it or something?

Tyler

i believe it involves adjusting the sleeve which the crown actually screws into and yes it can be done, if it matters to you

steve

Rockrolex · 25 September 2005, 12:01 AM

Quote:

Originally Posted by baseballduck

Not that I would really care, but when and if I finally get a sub and the crown isn't straight up can't they adjust it or something?

Tyler

It's something that very anal Rolexaholics (I won't mention any names here out concern for their privacy - I'll only refer to them by their initials - JJ

) worry about when they get up in the morning and when they go to sleep at night. Which is why they are insomniacs.

The rest of us don't really care - and therefore sleep well at night.

Seadweller · 25 September 2005, 12:19 AM

(I won't mention any names here out concern for their privacy - I'll only refer to them by their initials - JJ )

LOL

Earl · 25 September 2005, 12:34 AM

Quote:

Originally Posted by worktolivelife

i believe it involves adjusting the sleeve which the crown actually screws into and yes it can be done, if it matters to you

steve

Steve, I always knew the sleeve or barrel is screwed into the case but, do you think it could be tightened or loosen to accomadate the crown allignment without messing up the pressure rating or even stripping the threads of the sleeve?

worktolivelife · 25 September 2005, 01:34 AM

Quote:

Originally Posted by Earl

Steve, I always knew the sleeve or barrel is screwed into the case but, do you think it could be tightened or loosen to accomadate the crown allignment without messing up the pressure rating or even stripping the threads of the sleeve?

there must be a tolerance factor hence no two crowns seem to be the same i believe it's a case of getting the right positioning between the various threaded items involved, a little time and patience by a competant watchmaker

steve

molex · 25 September 2005, 04:10 AM

Quote:

Originally Posted by padi56

Myself never botherd to look JJ,as long as its screws down its ok with me

TA-DA! Full extension on the take-off, tight rotation, and sticks the landing perfectly! A full 9.98 from the judges!

AKA, I totally agree

JJ Irani · 25 September 2005, 04:16 AM

Quote:

Originally Posted by Rockrolex

It's something that very anal Rolexaholics (I won't mention any names here out concern for their privacy - I'll only refer to them by their initials - JJ

) worry about when they get up in the morning and when they go to sleep at night. Which is why they are insomniacs.

The rest of us don't really care - and therefore sleep well at night.

Insomnia? Me? I'm usually asleep before the proverbial "head hits the pillow" thing!!

Frankly, I'm not at all anal about this crown thingy....just wanted to start up a new thread and this is the first thing that came to mind.

For example, here's my beloved TT YM with its crown all over the place...

26 September 2005, 04:00 AM

My YM did not have the crown straight up when I bought it, but it did after it's last service.

JJ Irani · 26 September 2005, 04:50 AM

Quote:

Originally Posted by Avalon

My YM did not have the crown straight up when I bought it, but it did after it's last service.

Good on ya, Al. Obviously they change the entire crown and stem at every service 'cause there is a waterproofing seal within the confines of the crown. That seal, over a period of time, gets compressed against the upper surface of the stem opening and would finally lose its sealing properties.

Hence, the full crown has to be changed. Of course, the new crown would have a different thread configuration which, by sheer luck, matched up with those of the stem to make the coronet land up in the straight up direction.

JJ

dman · 27 September 2005, 11:08 AM

My SD (dearly departed) and my YM, the last two I have bought were both perfect. Lucky I guess, not so when I go to the casinos though.

24 September 2005, 02:59 PM	#1
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,320	Any luck with STRAIGHT UP crowns? Hi guys, We all know that when we pick up a Rolex, chances of getting one with its crown straight up are like 1:100....seriously. In 25 years and 16 Rollies, well I guess I could consider myself lucky...'cause I got two of them - both brand new - with crowns at 90 degrees to the horizontal!! Firstly, my former SD... and now my new Exp-II... Someone on another forum (who was extremely anal about this) can eat his heart out!! LOL! Sorry, just couldn't resist!! __________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

24 September 2005, 05:28 PM	#2
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 52,364	Myself never botherd to look JJ,as long as its screws down its ok with me __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

24 September 2005, 07:17 PM	#3
worktolivelife "TRF" Member Join Date: Sep 2005 Location: UK Posts: 1,365	One thing more for me to fret about

24 September 2005, 07:18 PM	#4
worktolivelife "TRF" Member Join Date: Sep 2005 Location: UK Posts: 1,365	as well as fingerprints

24 September 2005, 11:15 PM	#7
baseballduck "TRF" Member Join Date: Jul 2005 Real Name: Tyler Location: Pinehurst NC Watch: Explorer 214270 Posts: 1,018	Not that I would really care, but when and if I finally get a sub and the crown isn't straight up can't they adjust it or something? Tyler __________________ Sedit qui timuit ne non succederet. Member #84

24 September 2005, 08:25 PM	#5
mamas "TRF" Member Join Date: Aug 2005 Posts: 792	lucky guy JJ .. when you visit mansors and see all that clevage.. is it only the crown that is straight up?

24 September 2005, 11:29 PM	#8
Sam Member Join Date: Jul 2005 Location: Texas Watch: Yes...too many!!! Posts: 426	Must be an EXPII thing JJ. Here's mine!

25 September 2005, 12:19 AM	#11
Seadweller "TRF" Member Join Date: Jul 2005 Posts: 750	(I won't mention any names here out concern for their privacy - I'll only refer to them by their initials - JJ ) LOL __________________ The Exclusive 4000ft Club.

26 September 2005, 04:00 AM	#16
---- Guest Posts: n/a	My YM did not have the crown straight up when I bought it, but it did after it's last service.

27 September 2005, 11:08 AM	#18
dman Lifetime TRF Patron Join Date: May 2005 Real Name: Daren Location: Austin Watch: the road Posts: 13,583	My SD (dearly departed) and my YM, the last two I have bought were both perfect. Lucky I guess, not so when I go to the casinos though. __________________ You either get it or you don't, if you have to ask, YOU DON'T!! I really hope that midget cop doesn't find me in Kokomo.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)