ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
5 June 2009, 09:17 AM | #1 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
Sub 5508 project, might have bitten off more than I can chew!
Hi Guys,
Been looking out for a real vintage sub for a long time and seem to have got one. Paid over the top for it as it needs a fair bit as you can see. It came from a dealer who intended to get the work done, but he never got around to sorting it. As far as I can see, it needs as least a good service, bezel & insert, rotor post, stem, button, glass, tube, seals and maybe a fair bit more though I quite like the dial as it is. Parts I guess will be difficult to source, so would it be best sent to Rolex, Switzerland? I am hoping that I have not been stitched up as now I have removed the bracelet, I see the serial numbers between the lugs seem too low? (400462 as far as I can see, though they are worn). Anyway, I would appreciate any views. Cheers, Jeff. |
5 June 2009, 09:24 AM | #2 |
Banned
Join Date: Aug 2008
Real Name: De
Location: Tokyo
Watch: Daytona, Sub, DS,
Posts: 1,046
|
Holy cow. That's a project bigger than Texas.
Good luck and keep us informed. |
5 June 2009, 09:33 AM | #3 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
|
5 June 2009, 10:08 AM | #4 |
Banned
Join Date: Apr 2008
Real Name: Pav
Location: Manhattan
Posts: 11,495
|
I would love to see the final result.....
I am sure it's going to be fantastic. |
5 June 2009, 10:29 AM | #5 |
Banned
Join Date: Dec 2007
Real Name: steven
Location: tampa bay
Watch: 1680 18k sub
Posts: 6,672
|
well if you dont want it you know who to call....ME!!
those parts you need are going to be very expensive indeed..I have most of them but for instance the original domed tropic 16 crystal runs about 450 bucks.. the bezel runs about 2k,and the insert is the same as the one that goes on the 6536 so that will run between 1 and 2k.. it might be cheaper for you to buy this one I have with a service dial thats 100% complete and just put your dial on it.. just a thought |
5 June 2009, 01:13 PM | #6 |
Banned
Join Date: Jan 2009
Real Name: Mark-O!
Location: Arlington, TX
Watch: Rolex
Posts: 12,714
|
Heh! I was just gonna say, give it to Steven! He can make it good as new!
|
5 June 2009, 04:09 PM | #7 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,459
|
You need to consult with a professional Rolex vintage restorer..
I recommend that you contact Bob Ridley at www.watchmakers.com You should be able to get a good idea of cost to restore this classic to good condition, then decide which way you want to go.........
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
5 June 2009, 04:49 PM | #8 | |
"TRF" Member
Join Date: Jun 2008
Real Name: Jackson
Location: So. California
Posts: 2,893
|
Quote:
Bob would give a good assessment...
__________________
Jackson |
|
5 June 2009, 06:40 PM | #9 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
Thanks Guys,
I am going to sit tight and think for a bit. Holidays coming up & all that, could be bad timing! |
6 June 2009, 12:42 AM | #10 |
"TRF" Member
Join Date: Apr 2008
Real Name: Brian
Location: Republic of Texas
Posts: 2,776
|
Collect up your parts one at a time. I know it would be hard for me to cough up all of that dough at once.
After they are collected, in a year or five, send them off for assembly, cleaning, etc. At least that would be how I did it. That or steve's offer of the one with the service dial. Unload the service dial, extra case and movement and you make some, much needed, quid back. |
6 June 2009, 12:46 AM | #11 |
"TRF" Member
Join Date: Mar 2006
Real Name: Frank
Location: Chattanooga, TN
Watch: SS Submariner Date
Posts: 4,042
|
That is one heck of a watch and I think well worth pursuing for restoration. I would ask Bob Ridley about an estimate to give you an idea of what you're looking at cost-wise. Between Bob, Steve, and the other great members on this forum, they can probably source whatever you need to make that restoration a huge success. What a fantastic watch!
__________________
RTFT - Read The Friggin' Thread FcB |
6 June 2009, 08:01 AM | #12 | |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
Quote:
|
|
6 June 2009, 11:57 AM | #13 |
"TRF" Member
Join Date: Apr 2009
Real Name: Ian
Location: Ottawa Canada
Watch: Air-King-Date
Posts: 43
|
I'd keep it and make a personal project out of it.Keep searching the net and over time you'll eventually get it all pieced together.There is no better personal satisfaction than the completion of a long term project.Think of the folks who take on long term car and motorcycle restoration projects.When they're done they have a personal showpiece that is truly their own,and that they're very proud of because they see the results of their time and work.
|
6 June 2009, 12:50 PM | #14 |
Member
Join Date: May 2009
Real Name: Mark
Location: Masschusetts
Watch: Omega Planet Ocean
Posts: 399
|
That's one option. Another is to send it to someone trustworthy like Steve and get a solid assessment of what it will take and cost, and the options available. Then, if you choose, have it restored as you can afford to do it. Pay as you go and can and eventually...you'll have a true trophy.
|
6 June 2009, 06:59 PM | #15 |
TechXpert
Join Date: Mar 2008
Real Name: Dal
Location: Seattle
Watch: 168000
Posts: 1,614
|
I have a few 5508's in restoration at the moment, and your watch is not that bad. A full restoration is not always the answer either. This could take a while for you to complete but the bite you took should last a long while, keep chewing!
|
19 June 2009, 08:46 AM | #16 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
5508 update
Starting to come together. New bezel & insert arrived. Happy with the bezel, but I think the insert could be newer or a pattern part.
|
19 June 2009, 09:04 AM | #17 |
"TRF" Member
Join Date: Feb 2009
Real Name: Jarrett
Location: San Antonio TX
Watch: ing everybody
Posts: 1,515
|
Looks great...I am jealous!!
|
19 June 2009, 09:08 AM | #18 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
|
20 June 2009, 03:33 AM | #19 |
TechXpert
Join Date: Mar 2008
Real Name: Dal
Location: Seattle
Watch: 168000
Posts: 1,614
|
almost there. Good to see you hanging in there.
|
20 June 2009, 06:12 AM | #20 |
Banned
Join Date: Mar 2007
Location: USA
Watch: ing the time go by
Posts: 1,444
|
Hi Jeff, those numbers look fine, in my book 1957-59 run from 220000 to 490000, so you look ok there. That insert sticks out like the dogs whatsits, I am sure you can do better, important to get the right period one. The crystal could be rubed back with a very fine paper then finished off with brasso thats what I did to mine, which as can be seen was very rough, nice to keep original if possible. All that is really needed then is to find a good watchmaker to service it and replace the crown, no big deal really. And of course, dont touch the dial or hands, thats one hell of a rare beast.
|
20 June 2009, 06:24 AM | #21 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
Hi, Yes hanging on in there Bank balance smarting a bit! The crystal arrived today, so getting a bit excited about it now. I just happened to have what I think is the right, or if not a very close example of the correct bracelet. Its a ref 7206 with # 80 end pieces. Its a bit worn, but I am not too worried anout that. Thanks for your support Dalton,
Jeff. |
5 July 2009, 08:54 AM | #22 |
"TRF" Member
Join Date: Apr 2008
Real Name: Jeff
Location: Devon, UK
Watch: Sea-Dweller
Posts: 208
|
Hello Phil, Thanks for your help and reassurance on the serial numbers. I agree about the insert. Not best pleased as the seller stated "authentic" It came with the bezel, which appears to be fine. I should have tried polishing the glass as it sounds like it could have been polished out, but I seem to have found a new old stock tropic 16, so it should be ok. Latest part believe it or not is a Rolex new rotor post, axel for swinging weight as the supplier calls it has arrived. Genuine unused Rolex part! I'll post photos in a month or so.
|
5 July 2009, 07:52 PM | #23 |
"TRF" Member
Join Date: Aug 2006
Location: Africa
Posts: 1,127
|
I have enjoyed reading the story so far.........keep going as it is a great watch and I am looking forward to seeing the final product!!!
Thanks for sharing |
9 July 2009, 06:00 AM | #24 |
"TRF" Member
Join Date: May 2007
Location: U.K
Posts: 25
|
Nice work! Thank you for giving these beautiful watches a new lease of life, its worth it as they don't make them like they used too! Cheers
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.